Logi Wooden Laptop Stand review

Short take: The Logi Wooden Laptop Stand is a compact, beechwood support that folds for storage. Logitech publishes a single open height and a stand-only weight, but no supported laptop footprint or load rating. It suits a buyer who values a simple wooden form and can verify their own laptop fit; it is not a documented height-adjustable or swiveling stand.

A stand-only product, not a desk bundle

Logitech's U.S. product page identifies this exact item as the Logi Wooden Laptop Stand, model 956-000155, in a wood finish. Logitech describes the material as beech wood and says the stand folds so it can be carried in a bag. That gives the item a different role from the Logitech Casa Pop-Up Desk: Casa is a foldaway case with a bundled keyboard and touchpad, while this page presents a laptop stand rather than that complete input-device kit. If you need those peripherals as well, compare the Casa assessment instead of assuming they are included here.

The product photograph shows a tilted wooden board with lower retaining pieces and a folding support behind it. It is a manufacturer image of the exact listed model, not a test of how a particular laptop sits on those contact points. No fit adapter, carry sleeve, or other included accessory is confirmed in the reviewed U.S. product material, so check the package listing rather than inferring extras from photographs.

Folding is for storage, not a height setting

The manufacturer describes the stand as foldable for packing away. A same-part-number Logitech Canada page (956-000155) lists one open height of 128 mm, or about 5.0 inches, and a closed height of 10 mm. The reviewed pages do not describe alternate working-height positions. The useful distinction is that folding changes the stand between its working form and a storage form; it does not establish selectable screen height after setup.

If raising the screen by a chosen amount is essential, compare a model with a documented adjustment mechanism, such as the Rain Design iLevel or Nulaxy C1, and check the exact position range for that model. The wooden stand's simple fixed geometry may be welcome if you already know the height works with your chair, desk, and laptop, but its single published height offers less room to tune that arrangement.

Use the published dimensions carefully

The exact-SKU Canadian listing gives overall open dimensions of 226 × 230 × 128 mm (about 8.9 × 9.1 × 5.0 inches), closed dimensions of 226 × 258 × 10 mm (about 8.9 × 10.2 × 0.4 inches), and a weight of 342 g (about 0.75 lb). These are stand dimensions, not a stated laptop-support surface measurement. In particular, the 226 mm width should not be treated as a guaranteed laptop width: the pages do not map the board, stops, or laptop feet to a supported computer footprint.

The U.S. page does not give a maximum laptop size, supported chassis thickness, load capacity, or computer-by-computer fit list. There is therefore no evidence-based 13-, 15-, or 17-inch threshold to apply. Before ordering, measure the laptop's actual base and feet, note where its front edge would meet the stand, and confirm that the laptop's weight is accepted by Logitech for this exact model. Screen diagonal alone cannot answer those questions.

A portable footprint still needs a bag check

The manufacturer's fold-and-carry description and the same-SKU closed dimensions make this more packable than a stand that cannot fold. At 342 g, the listed mass applies to the stand; it is not a complete work kit. Logitech does not publish a separate carrying case or a complete packed envelope in the reviewed U.S. page. Check your bag's usable interior against the closed 226 × 258 × 10 mm dimensions, allowing room for the surrounding laptop and other items. The published flat measurements do not guarantee that a loaded bag will protect the wooden pieces.

How it differs from other stand types

This is not the same sort of fixed desktop platform as the Rain Design mStand, whose nonfolding aluminum body creates a more permanent desk arrangement, and it is not a multi-position riser like the products in our adjustment reviews. Nor is it a vertical holder for a closed laptop or a rotating base for screen sharing: neither function is documented for this model. The wood finish and fold-away form are the meaningful distinctions supported by Logitech's page; they do not imply a specific stability, cooling, or ergonomic result.

For a travel shortlist, this model can be considered because Logitech documents folding. That is a feature match, not a promise that every packed bag or laptop will fit. The travel finder compares it with stands whose fold, settings, and packed dimensions differ; use each review to check those limits against your own equipment.

Who should consider it

Consider the Logi Wooden Laptop Stand if a foldable beechwood support and a thin closed form match your desk routine, and you are willing to verify the laptop's contact fit before relying on it. Pass if you require a published load or chassis-size limit, selectable working height, a swivel base, or confirmed lap use. The available evidence is Logitech documentation and an exact-model image; this is a research-based assessment, not a hands-on test.